Win a free furnace replacement. Apply by Dec 9
CSLB #1023360

Supporting article · 6-minute read · Last reviewed November 2026

SMUD heat pump rebates in 2026: what they pay and how to qualify

As of November 12, 2026, SMUD's heating and cooling rebates page lists $3,000 for a variable-stage heat pump and $2,000 for a two-stage heat pump when you switch from gas to electric, and $1,000 for a two-stage or variable-stage upgrade from an existing electric system. Single-stage heat pumps do not qualify, and the system must be installed by a participating contractor in the SMUD Contractor Network, who submits the rebate for you. Separate Go Electric rebates of up to $5,500 cover a smart panel, subpanel, or new circuit. Only SMUD electric customers are eligible — that's most of Sacramento County, not Roseville or most of Placer County.

Reviewed by Vasiliy BardadinOwner & Lead Technician, Statewide HVAC · CSLB #1023360

On this page · 5 sections
  1. 01The current SMUD heat pump HVAC rebate amounts
  2. 02Equipment and installation rules that decide eligibility
  3. 03The contractor-network requirement (and what to check)
  4. 04Who qualifies: SMUD territory, not just a Sacramento address
  5. 05What it costs before and after the rebate

The current SMUD heat pump HVAC rebate amounts

These are the residential heat pump HVAC amounts on smud.org/HVAC ("Heating and cooling rebates") as we read the page on November 12, 2026. SMUD raised them in a February 18, 2026 announcement, saying the increase was meant to offset the expiration of federal tax credits and state incentive programs that had run out of funding.

The biggest number goes to the biggest change: replacing a gas furnace with an all-electric heat pump. If you already heat with electricity (an older heat pump or electric resistance), the upgrade rebate is smaller.

SMUD residential heat pump HVAC rebates, as listed on smud.org/HVAC (checked 2026-11-12)
What you're installingStarting pointSMUD rebate
Variable-stage heat pump HVACGas heating$3,000
Two-stage heat pump HVAC (15.2 SEER2 minimum)Gas heating$2,000
Two-stage or variable-stage heat pump HVACExisting electric heating$1,000
Go Electric: smart panel, subpanel, or new circuitSubpanel and circuit require a gas-to-electric conversionUp to $5,500
Single-stage heat pumpAnyNot eligible

Equipment and installation rules that decide eligibility

The dollar amount only matters if the job meets SMUD's requirements. Per smud.org/HVAC, the rebate applies to package, split, and mini-split heat pump systems that meet all of the following:

  • A two-stage or variable-stage compressor. Single-stage equipment is not eligible at any efficiency.
  • At least 15.2 SEER2.
  • The installation passes Title 24 through a HERS-verified CF3R, and any new ductwork is insulated to at least R-8.
  • A connected thermostat that is Wi-Fi enabled and 7-day programmable.
  • Mini-splits must serve the entire home — a single head in one room doesn't count toward this rebate.
  • The project complies with city or county permits and inspections.

The contractor-network requirement (and what to check)

This is the rule that trips people up. SMUD requires the system to be installed by a participating contractor in the SMUD Contractor Network. That contractor gives you the rebate application to sign and submits it. You get the rebate after the project is complete, though SMUD notes a contractor may choose to give you the rebate amount up front and collect it from SMUD afterward.

Before you sign any quote that counts on a SMUD rebate, confirm that the installing company appears in SMUD's residential contractor directory at smudcontractornetwork.org/all-residential-contractors. If it isn't listed, ask the contractor directly whether they are enrolled. A rebate shown on an estimate isn't guaranteed until the installer is confirmed in the network.

If you're planning a gas-to-electric switch, our heat pump conversion guide covers the equipment, electrical, gas line, and permit steps that go with it.

SMUD also states on the page that it does not endorse or warrant any contractor's workmanship, labor, cost, or materials. Being listed makes you eligible for the rebate. It isn't a quality rating, so compare scope, equipment, and duct work the same way you would for any quote.

Who qualifies: SMUD territory, not just a Sacramento address

SMUD describes its territory as roughly 900 square miles covering most of Sacramento County plus small, adjoining portions of Placer and Yolo counties. Your mailing city isn't what decides eligibility; the name on your electric bill is.

Per smud.org/HVAC, you must be a SMUD customer with an active account, and the home must be individually metered by SMUD. Single-family homes and multifamily buildings of up to four units qualify (each unit metered separately). Manufactured or modular homes can qualify if they're individually metered SMUD customers and subject to state and local building codes; mobile homes on a chassis or built under HUD code may not.

If your power comes from Roseville Electric (the City of Roseville's utility) or PG&E, which serves much of Placer, El Dorado, and Nevada counties, SMUD's rebate doesn't apply to you. See our Roseville Electric guide for what that utility currently lists.

What it costs before and after the rebate

SMUD publishes its own installed-cost figures for heat pump HVAC projects, before any rebates. On November 12, 2026 the page listed a median installed cost of $19,193 for gas-to-electric heat pump HVAC (minimum $5,000, maximum $51,159) and $18,455 for electric-to-electric upgrades (minimum $5,000, maximum $47,209). SMUD says the figures cover the past 12 months and are refreshed quarterly.

The spread between minimum and maximum is the useful part: home size, duct condition, panel capacity, and equipment tier move a project more than the rebate does. A $3,000 rebate against the $19,193 gas-to-electric median is meaningful, but it doesn't make a poorly sized system a good deal.

The rebate stacks with fewer programs than it used to. SMUD's page says its rebates can be combined with statewide and federal incentives, but the federal Section 25C credit ended for equipment placed in service after December 31, 2025, and TECH Clean California's single-family HEEHRA rebates have been fully reserved statewide since February 24, 2026. For a 2026 install, the SMUD rebate is likely the main incentive available.

Common questions

How much is the SMUD heat pump rebate in 2026?

As listed on smud.org/HVAC on November 12, 2026: $3,000 for a variable-stage heat pump replacing gas heat, $2,000 for a two-stage heat pump (15.2 SEER2 minimum) replacing gas heat, and $1,000 for a two-stage or variable-stage upgrade from an existing electric system. Go Electric rebates of up to $5,500 separately cover a smart panel, subpanel, or new circuit. SMUD says rebates are subject to funding availability.

Does a single-stage heat pump qualify for the SMUD rebate?

No. SMUD's heat pump HVAC rebate requires a two-stage or variable-stage compressor and at least 15.2 SEER2. A single-stage system doesn't qualify at any efficiency rating, so confirm the compressor type on the quote before you count the rebate.

Can I apply for the SMUD rebate myself?

Not for heat pump HVAC. SMUD requires installation by a participating SMUD Contractor Network contractor, and that contractor submits the application, which you sign. Check that your installer is listed at smudcontractornetwork.org before signing a contract that assumes the rebate.

I live in Roseville or Rocklin. Can I get the SMUD rebate?

Only if SMUD is your electric utility. The City of Roseville is served by Roseville Electric, and most of Placer County is served by PG&E, so most homes there are not eligible. SMUD's territory is most of Sacramento County plus small adjoining parts of Placer and Yolo counties, and your electric bill is the quickest way to check.

Can I combine the SMUD rebate with the federal tax credit?

Not for a 2026 install. The federal Section 25C credit ended for equipment placed in service after December 31, 2025, under Section 70505 of the One Big Beautiful Bill Act. SMUD's page still mentions the credit for systems installed through December 31, 2025, and that window has closed.

Does SMUD require HERS testing for the rebate?

Yes. SMUD requires the installation to pass Title 24 through a HERS-verified CF3R, and any new ductwork must be insulated to at least R-8. That verification is normally part of a permitted heat pump installation, so treat a quote that skips the permit as a red flag.

Sources

Program amounts and rules change. Confirm current terms with the source before you rely on them.

Reviewed and published by Statewide HVAC

Vasiliy Bardadin, owner and lead technician of Statewide HVAC, standing outdoors in a white Statewide HVAC polo.

Vasiliy Bardadin

Owner & Lead Technician

Statewide HVAC is owner-operated and Roseville-based.

Statewide HVAC is a CSLB-licensed heating and air conditioning contractor (#1023360) serving the Sacramento region from Roseville. Our guides are written for local homeowners, list their sources, and show the date they were last reviewed. About us

Questions this guide didn't cover?

We'll answer them on your project — no sales pressure.

(916) 461-3405Request Service