Win a free furnace replacement. Apply by Dec 9
CSLB #1023360

Placer County · Sacramento Valley to Sierra Nevada foothills

Colfax's HVAC company, inside city limits and up in the 95713 hills

Statewide HVAC is a licensed HVAC company serving Colfax, the small railroad city at about 2,425 feet where Interstate 80 meets State Route 174. Colfax is two markets under one ZIP code: a compact town where electric and PG&E gas heat dominate, and a much larger ring of rural homes that run on tank propane and wood. Which one your house is in decides the fuel, the equipment and even which office issues the permit.

  • Reviews on Google
  • CSLB #1023360 · C-20 & C-43
  • Roseville office
  • Labor warranty on our work
Call (916) 461-3405

Get a quote

HVAC help in Colfax

Address (optional)

By submitting you agree we may contact you by phone (incl. text) and email about your request. Message/data rates may apply. Reply STOP to opt out of texts. See Privacy and Terms.

Colfax at a glance

The facts behind HVAC in Colfax

Median home built
1987 (≈39 years ago)U.S. Census Bureau ACS 2020–2024
Elevation
2,425 ft
July avg high / Jan avg low
92°F / 37°FNOAA 1991–2020 normals, Colfax station
Electric
PG&E delivery · Pioneer Community Energy supply
Natural gas
PG&E
ZIP codes
95713

Local note: Colfax sits at the junction of Interstate 80 and State Route 174, was incorporated in 1910, and was the southern terminus of the Nevada County Narrow Gauge Railroad from 1876 until 1942

Colfax HVAC guide · 10 sections
  1. 01One ZIP code, two very different housing markets
  2. 02Electric in town, propane and wood on the ridges
  3. 03Railroad-era houses next to 1980s and 1990s builds
  4. 04What 2,400 feet means for heating and cooling
  5. 05City of Colfax permits vs Placer County permits
  6. 06PG&E, Pioneer and the outages Colfax plans around
  7. 07Propane deliveries and wood stoves in the hills
  8. 08Colfax service pages
  9. 09Rentals, duplexes and small buildings in town
  10. 10Choosing an HVAC company in Colfax

One ZIP code, two very different housing markets

The City of Colfax was incorporated in 1910 and had 1,995 residents at the 2020 Census. It grew up as a Central Pacific stop and later the southern end of the Nevada County Narrow Gauge Railroad, and its downtown still sits along Main Street and the tracks. But the 95713 ZIP code reaches well past the city limits into unincorporated Placer County, and the Census Bureau's 2020–2024 American Community Survey counts about 3,927 housing units across the whole ZIP, against about 1,069 inside the city.

Those two areas behave like different places. Inside the city, only about 49% of homes are single detached houses, roughly 22% are in buildings with two to four units, and about 55% of occupied homes are rented. Across the full ZIP, about 78% are detached houses, about 8.5% are mobile homes, and about 79% are owner-occupied. When you call us, the first thing worth telling us is whether the house is in town or out on a county road, because the answers that follow are different.

Electric in town, propane and wood on the ridges

Heating fuel shows the split most clearly. In the city, electricity is the largest single heat source, and PG&E line gas and tank propane are close behind it. Across the wider ZIP, propane leads by a wide margin and nearly one household in five heats mainly with wood.

  • Electric heat covers several kinds of equipment. The Census count lumps together baseboards, wall heaters, electric furnaces and heat pumps. Where the house still runs on electric resistance heat, a heat pump is usually the biggest single efficiency change available. Our guide to home heating system types explains how to tell what you have.
  • Gas service stops where the mains stop. About 29% of city homes use PG&E gas, but the share drops to about 14% across the ZIP. Outside town, assume a furnace runs on propane until the rating plate says otherwise.
  • Propane and wood homes are the strongest heat pump candidates. A heat pump takes over most of the heating from a propane furnace or a stove, and it adds cooling. See heat pump installation in Colfax for how that plays out here.
Primary heating fuel, occupied homes (Census ACS 2020–2024, 5-year estimates)
Heating fuelCity of ColfaxZIP 95713 (includes the city)
Electricityabout 37%about 21%
Utility gas (PG&E)about 29%about 14%
Bottled or tank propaneabout 24%about 43%
Woodabout 8%about 19%
All other fuels, or noneabout 3%about 3%

Railroad-era houses next to 1980s and 1990s builds

The median home inside the city was built in 1987, and the median across the ZIP in 1985, so on paper Colfax is not an old housing stock. The averages hide a mix. About 14% of homes inside the city were built in 1939 or earlier, not far behind the 17% built in the 1990s. Across the ZIP, the 1980s were the busiest decade, with about 24% of all units, and roughly 9% have gone up since 2010.

  • Pre-war houses: ductwork was usually added decades after the house was built, often through a crawlspace or a closet. Duct condition and return-air size matter as much as the furnace. The return-air sizing guide covers the most common shortfall.
  • 1980s and 1990s houses: many are on their second furnace and still have the original ducts. A replacement is the right time to test them, as our ductwork guide explains.
  • Manufactured homes: about 8.5% of the ZIP's housing. Their furnaces are a separate, sealed-combustion category, and repair parts have to match the unit's listing.
Housing units by year built (Census ACS 2020–2024, 5-year estimates)
BuiltCity of ColfaxZIP 95713
1939 or earlierabout 14%about 7%
1940–1969about 13%about 16%
1970sabout 12%about 14%
1980sabout 15%about 24%
1990sabout 17%about 16%
2000sabout 14%about 13%
2010 or laterabout 15%about 9%

What 2,400 feet means for heating and cooling

Colfax has its own NOAA climate-normals station, at about 2,380 feet, so these figures describe the town itself rather than a neighbor. Compared with Auburn's station about 1,090 feet lower, Colfax logs about 3,335 heating degree days a year against Auburn's 2,813, and about 37 freezing nights against Auburn's 20. Summers are still hot, with about 66 days a year at 90°F or above.

  • Snow is occasional, not constant. February is the snowiest month in the normals, at about 2.6 inches. That is enough to bury a low condenser pad, block a sidewall furnace vent or slow a propane truck, so equipment height and vent location matter.
  • Freezing nights are routine, deep cold is rare. At under one night a year below 20°F, Colfax winters sit comfortably inside what current cold-climate heat pumps are rated for. The cold-weather heat pump ratings guide explains which numbers to compare.
  • Above the 2,000-foot line. Trade guidance says most gas furnaces need a 4% input derate for every 1,000 feet above 2,000 feet. At Colfax's elevation that adjustment is small, but it is real, and it is covered on our Colfax furnace replacement page.
NOAA 1991–2020 normals, Colfax station USC00041912 (about 2,380 ft)
MeasureNormal
Average July high92.1°F
Average December low (coldest month)36.1°F
Nights per year at or below 32°Fabout 37
Nights per year at or below 20°Fabout 0.3
Days per year at or above 90°Fabout 66
Annual heating degree daysabout 3,335
Annual cooling degree daysabout 1,273
Annual snowfallabout 7.2 inches
Annual precipitationabout 45.9 inches

City of Colfax permits vs Placer County permits

This is the question that trips people up in Colfax. The answer depends on the parcel, not the mailing address.

  • Inside city limits: the City of Colfax Building Department handles building, mechanical, electrical and energy-code permits for work within the city, run out of City Hall at 33 South Main Street. Permit paperwork is emailed to the city rather than filed through the county.
  • Who staffs it: the city's staff directory lists the building inspector as a consultant position on Tuesdays and Thursdays, and notes that city offices are closed on Fridays. Plan permit submittals and inspections around those days.
  • What the city asks for: the City of Colfax building permit application asks a licensed contractor for both a state license number and a City of Colfax business license number, and bases its building fees on the stated construction valuation. Its list of possible approvals includes PG&E, among other agencies.
  • Outside city limits: homes in the rest of 95713 are in unincorporated Placer County, so permits go to the county through the Placer County Permits Portal, which handles building applications and inspection scheduling.
  • Either way, the state rules are the same. An HVAC replacement in California has to be permitted, installed by a licensed contractor, and tested by an independent ECC rater (formerly HERS). The duct leakage test guide explains the most common test.

PG&E, Pioneer and the outages Colfax plans around

PG&E lists Colfax in both its electric and its gas service territory. On the electric bill, Pioneer Community Energy is the default generation supplier for the City of Colfax and for unincorporated Placer County, with PG&E still delivering the power and sending the single monthly bill. Customers can opt out to PG&E generation.

Outages are the bigger planning issue. When we sampled points in and around the city on CAL FIRE's Fire Hazard Severity Zone map, every one fell in a Very High zone, whether in the city's local responsibility area or the surrounding state responsibility area. PG&E's Public Safety Power Shutoffs reach Placer County in fire weather; on Saturday, September 12, 2026, PG&E reported about 1,000 Placer County customers de-energized. Winter storms count too. In December 2021, a record Sierra snowstorm left tens of thousands of PG&E customers without power, and Colfax's mayor said PG&E's best estimate for restoring the city was January 2.

Two practical points follow. First, every furnace in Colfax, propane and gas included, needs household electricity for its igniter, controls and blower, and a heat pump needs it for everything. Second, the City of Colfax posts PG&E's distribution microgrid fact sheet, which describes temporary generators that can power a community's central "Main Street" corridor during a shutoff, with a brief outage when the microgrid connects and another when it disconnects. That helps downtown, not the rural roads. If you're sizing a generator or battery to run the heat, we can tell you what your furnace or heat pump actually draws.

Propane deliveries and wood stoves in the hills

With propane heating about 43% of homes in 95713, delivery logistics are part of keeping the heat on. One national supplier's winter guidance asks will-call customers to order when the gauge reads about 30%, warns that winter schedules can stretch, and asks owners to flag the tank and driveway edges before snow and clear a path to the tank. Another supplier's snow guidance says not to pile or plow snow onto tanks, gas lines, regulators or appliance vents. If a tank does run dry, the gas system has to be leak-tested before it is turned back on, so the first call goes to the propane company, not to us.

Wood is the main heat for about 19% of the ZIP's households, and two Placer County Air Pollution Control District rules apply. Under Rule 225, Section 303, a non-EPA-certified free-standing wood stove must be rendered inoperable before a home is sold or transferred. Separately, the District's wood stove changeout program lists an electric heat pump among its replacement options, at up to $5,000 for the standard incentive and up to $10,000 for the enhanced one, for owners or renters who use an uncertified stove, insert or fireplace as their primary heat. Applicants must not remove the old device before the voucher is approved, and the voucher is redeemed with a retailer on the District's participating list, so check that list before signing with any installer.

Federal help is narrower than it was. The 25C energy-efficient home improvement credit ended: the IRS says it applied to improvements made through December 31, 2025.

Colfax service pages

Each of these covers one job in detail for Colfax homes, from the fuel and the elevation to the permit path:

Rentals, duplexes and small buildings in town

More than half of the occupied homes inside the city are rented, a much higher share than in the surrounding ZIP. For tenants, the practical rule is to report a heating problem to the owner or manager in writing and let them arrange the service call, since the equipment and the permit belong to the property. For owners of duplexes and small multi-unit buildings, each unit usually has its own furnace or heat pump, and replacing them one at a time as they fail is common. A heat pump replacing electric wall heaters in a small unit is often a ductless job, which our ductless mini-split guide covers.

Choosing an HVAC company in Colfax

Ask any contractor four questions here. Do they work on propane and electric equipment, not just natural gas? Do they know whether your parcel is inside the city, and will they hold a City of Colfax business license if it is? Will they size the system with a load calculation instead of copying the old nameplate? And who pulls the permit and books the ECC test?

Statewide HVAC holds CSLB license #1023360 with C-20 (warm-air heating, ventilating and air-conditioning) and C-43 (sheet metal) classifications; check it on the CSLB license lookup. Down the hill, we also cover Meadow Vista and Auburn, and the Placer County page lists the rest. The cost calculator gives a planning range, and the contact page reaches the office.

Google reviews

What customers say on Google

Read our reviews on Google

Reviews and ratings shown live from Google Maps.

  • Loading reviews from Google…
Vasiliy Bardadin, owner and lead technician of Statewide HVAC, standing outdoors in a white Statewide HVAC polo.

Owner-operated

Meet Vasiliy.

Vasiliy Bardadin owns Statewide HVAC and works as its lead technician. The company is licensed by the California Contractors State License Board (CSLB #1023360, C-20 and C-43) and runs out of a Roseville office serving the greater Sacramento region.

Owner & Lead Technician
Vasiliy Bardadin
Since 2017
CSLB-licensed

How it works in Colfax

What happens after you reach out

  1. 01

    Call or send a request.

    Tell us what the system is doing — not heating or cooling, making noise, won't start. That's enough to begin.

  2. 02

    A technician diagnoses it.

    We inspect the system and show you what we found. No guessing. No parts-cannon. The actual problem, explained plainly.

  3. 03

    You decide what happens next.

    Repair or replace, budget range, timeline. The call is yours — we lay out the options and you choose.

Colfax HVAC questions

Who issues HVAC permits in Colfax?

It depends on the parcel. Inside city limits, the City of Colfax Building Department at City Hall, 33 South Main Street, handles the permit, and the application asks the contractor for a City of Colfax business license number. Outside the city, the rest of ZIP 95713 is unincorporated Placer County, so the permit goes through the Placer County Permits Portal.

Is natural gas available in Colfax?

In much of the city, yes. About 29% of occupied homes in the city heat with PG&E gas. Across the wider 95713 ZIP that drops to about 14%, and tank propane, at about 43%, is the most common heating fuel. Check whether a gas main reaches your street before planning around it.

Does Colfax get enough snow to affect HVAC equipment?

Some years. The Colfax NOAA station averages about 7.2 inches of snow a year, most of it from December through March. That is enough to cover a low condenser pad or a sidewall furnace vent, so outdoor units and vents should sit where snow and roof runoff won't bury them.

Will a heat pump work in Colfax winters?

Yes, when it's sized correctly. The Colfax station averages a 36.1°F December low, about 37 freezing nights a year and fewer than one night a year at or below 20°F. That is well within the rated range of current cold-climate heat pumps, and many owners keep a propane or gas furnace as backup.

My furnace stopped during a PG&E shutoff. Is it broken?

Probably not. Propane and gas furnaces need electricity for the igniter, controls and blower, so they stop when the power does. If it doesn't restart once power is back, check the breaker and the furnace switch, then call for a repair.

Can I get help replacing a wood stove with a heat pump?

Possibly. The Placer County Air Pollution Control District's changeout program lists an electric heat pump among its options, at up to $5,000 standard or $10,000 enhanced, for homes that use an uncertified stove, insert or fireplace as primary heat. Don't remove the stove before the voucher is approved, and redeem it through a retailer on the District's participating list.

Who supplies electricity in Colfax?

PG&E delivers it and bills for it. Pioneer Community Energy is the default generation supplier for the City of Colfax and unincorporated Placer County, and customers can opt out to PG&E generation.

Sources for this Colfax guide

HVAC help in Colfax?

Tell us what's going on — diagnosis first, then options.

(916) 461-3405Request Service