Win a free furnace replacement. Apply by Dec 9
CSLB #1023360

Supporting article · 7-minute read · Last reviewed October 2026

Wildfire smoke and your HVAC system — a playbook for smoke season

During wildfire smoke events, EPA's guidance for homes with central HVAC is to run a high-efficiency filter (MERV 13, or the highest your system can handle), set the system to recirculate or close any outdoor-air intake, and run the fan continuously so the filter keeps working. Whole-house fans and open windows should stay off while outdoor air quality is poor. A sealed home, a compatible filter, and a portable HEPA unit in the bedroom together do far more than any single step alone.

Reviewed by Vasiliy BardadinOwner & Lead Technician, Statewide HVAC · CSLB #1023360

On this page · 7 sections
  1. 01Why smoke is an HVAC problem here
  2. 02Where to check air quality
  3. 03The central-HVAC smoke setup
  4. 04What 'MERV 13 if your system can handle it' means
  5. 05Sealing matters as much as filtering
  6. 06Where portable HEPA units fit
  7. 07After the smoke clears

Why smoke is an HVAC problem here

The Sacramento Valley and the Sierra foothills sit downwind of fires across Northern California, and smoke settles into the valley during late-summer and fall events. Those events overlap the heaviest air-conditioning weeks of the year, so the question isn't whether the HVAC will run during smoke — it's whether it will help or hurt.

The particles that matter most are PM2.5 — fine particles small enough to reach deep into the lungs. A large share of wildfire smoke sits in the 0.3-to-1.0-micron range, which is exactly the band lower-grade filters let through.

Where to check air quality

Make HVAC decisions from real readings, not the color of the sky. Smoke can be heavy at ground level on a clear-looking day, and the reverse.

  • AirNow (EPA) — official AQI readings and the Fire and Smoke Map
  • Sacramento Metropolitan Air Quality Management District — local forecasts and advisories for Sacramento County
  • Placer County Air Pollution Control District and El Dorado County AQMD — foothill-county advisories
  • California Air Resources Board — statewide smoke information and guidance
  • An indoor PM2.5 monitor — the only way to know whether your own house is keeping smoke out

The central-HVAC smoke setup

EPA's wildfire indoor-air guidance lays out the core steps for homes with forced-air systems. In practical terms:

HVAC settings during a smoke event
SettingDuring smokeWhy
FilterMERV 13, or highest the system toleratesCaptures a meaningful share of fine smoke particles per pass
FanOn (continuous), not AutoThe filter only works while air is moving through it
Outdoor-air intake / ventilationClosed or set to recirculateStops the system from pulling smoky air in
Whole-house fanOffThese are designed to pull large volumes of outdoor air through the house
Bath and kitchen exhaustMinimizeExhaust depressurizes the house and draws smoke in through leaks

What 'MERV 13 if your system can handle it' means

EPA's wording is deliberate. A MERV 13 filter in a system that can't push air through it reduces airflow, which reduces cooling and total filtration. Before smoke season is the time to find out: have a technician check static pressure with a MERV 13 in place. If the 1-inch slot can't handle it, a 4-to-5-inch media cabinet usually can.

Expect to change filters more often during prolonged smoke. A filter that lasts months in clean air can load up in weeks of heavy smoke. Check it weekly during an active event and keep a spare on hand — filter shelves empty fast once the sky turns orange.

Sealing matters as much as filtering

Smoke enters a house through every unintended opening: gaps around doors and windows, attic penetrations, and especially leaky return ductwork in the attic. A return duct with leaks pulls attic air — which during a smoke event is smoky outdoor air — directly into the system, often downstream of the filter.

Return-side duct sealing and a properly gasketed filter rack are the HVAC repairs most likely to change indoor PM2.5 readings during smoke season. Weatherstripping and keeping windows closed handle the rest of the envelope.

Where portable HEPA units fit

A portable HEPA air cleaner sized for the room is a strong complement to central filtration, especially in the bedroom where people spend eight hours. EPA's wildfire guidance recommends creating a 'clean room' with a portable air cleaner. Look for a unit whose clean air delivery rate (CADR) matches the room size and that does not intentionally produce ozone — in California, portable air cleaners must be CARB-certified for sale.

Avoid ozone generators and anything marketed as 'purifying' with ozone. Ozone is a lung irritant, and adding it to smoke exposure makes the problem worse.

After the smoke clears

Once outdoor AQI returns to good, replace the loaded filter, reopen ventilation, and switch the fan back to Auto if that's your normal setting. If you smell smoke inside days after an event, check the filter first, then consider whether return-side leaks are pulling attic air. Persistent smoke odor after a nearby fire is a different situation — see our guide on when duct cleaning is genuinely worth it.

Common questions

Should I turn my AC off during wildfire smoke?

Usually not. Turning off the system also turns off the filter. If your system recirculates indoor air (most residential central ACs do), running it with a MERV 13 filter and the fan on continuous keeps cleaning indoor air. The exception is a system that brings in outdoor air — close that intake or set it to recirculate first.

Does my central AC bring in outside air?

Most residential split-system ACs and heat pumps recirculate indoor air and do not have an outdoor-air intake. Some newer homes have mechanical ventilation (an ERV, HRV, or supply fan tied to the air handler) to meet California ventilation requirements. If you're not sure, a technician can identify any outdoor-air path and show you how to close it during smoke events.

Can I run my whole-house fan if it's cooler outside at night?

Not during a smoke event. A whole-house fan is built to pull large volumes of outdoor air through the house — which means pulling smoke in. Check AirNow or your local air district before running it, and wait until AQI returns to good.

How much does a MERV 13 filter actually help?

EPA reports that upgrading to a high-efficiency HVAC filter and running the system fan continuously may cut indoor PM2.5 by roughly half during smoke events. Actual results depend on how leaky the house is, how much air the system moves, and whether the filter seals properly in its rack.

Do smoke particles damage my HVAC equipment?

The main risk is filter loading: smoke clogs filters faster, which restricts airflow and can lead to frozen coils or furnace limit trips if the filter isn't changed. Ash can also coat outdoor condenser coils after nearby fires. Changing filters promptly and having the outdoor coil cleaned after heavy ash fall keeps the system running normally.

Reviewed and published by Statewide HVAC

Vasiliy Bardadin, owner and lead technician of Statewide HVAC, standing outdoors in a white Statewide HVAC polo.

Vasiliy Bardadin

Owner & Lead Technician

Statewide HVAC is owner-operated and Roseville-based.

Statewide HVAC is a CSLB-licensed heating and air conditioning contractor (#1023360) serving the Sacramento region from Roseville. Our guides are written for local homeowners, list their sources, and show the date they were last reviewed. About us

Questions this guide didn't cover?

We'll answer them on your project — no sales pressure.

(916) 461-3405Request Service